Non-Contact,Digital Torquemeters

Non-Contact Digital Torquemeters

1550 Kingston Rd. #1116
Pickering, ON
L1V 6W9
TEL: 1 800 809 7167 CDA/USA
Load Cells/Transducers
Pressure Sensors
Torquemeter/Torque Sensor
Vibration/Shock Monitors
Non-Contact Digital Torquemeters
MCRT® Non-Contact Digital Torquemeters
    • 0.05% Accurate Analog(s) of Shaft Torque, Speed (option) and Power (option)
    • Engineering Unit Digital Output Via Com Port, PC Interface Software Furnished
    • Supports 33 Units of Measure Without Recalibration
    • Eleven Selectable Constant Delay Signal Filters
    • Hardened to EMI From Adjustable Speed Drives
    • Remote, Bidirectional NIST Traceable* Calibration
    • 200%, 400% and 1,000% Overload Ratings
    • 0.02% Noise and Ripple
    • No Manual Adjustments

We are pleased to announce our new MCRT® Digital Torquemeters. These robust, non-contact devices have full scale ranges from 25 to 4,000,000 lbf-in. They output ±10V or ±5V analogs of torque, speed (an option) and power (an option) as well as engineering unit data via a resident com port. Two accuracy grades are offered: 0.05% and 0.1%.

These new torquemeters have no pots or switches and don't require any manual adjustments. Calibration values, null, scaling and units of measure are stored in nonvolatile memory and automatically loaded on power up. Internal signal processing is accurate to 14 bits. Select from any of thirty-three supported units of measure without recalibration.

Other features include hardening to EMI generated by IGBT-based adjustable speed drives, remote NIST traceable bi-directional calibration, selectable signal filters and inclusion of PC interface software. The software displays numeric data with sign and units of measure. It will also plot real time data, can be used to change units of measure, select ±5 or ±10 Volt analog output(s), select signal filters, archive calibration history and more.

These Digital Torquemeters are made with both 200% (MCRT® 48700V), 400% (MCRT® 49700V) and 1,000% (MCRT® 59700V) torque overload ratings. Units are shipped with an NIST traceable calibration performed in our NVLAP accredited metrology laboratory (Lab Code 200487). Stainless steel shafts, splash proofing and permanent lubrication enhance performance and provide long, maintenance-free life. Both shaft and flanged models are available.

MCRT® 48200V Series Digital Torquemeters

Site Designed and Maintained by J A Callan