Set,Point,Controller,Migatron,SPC-701

Set Point Controller Migatron SPC-701

1550 Kingston Rd. #1116
Pickering, ON
L1V 6W9
TEL: 1 800 809 7167 CDA/USA
Instronics
Manufacturers
Instrumentation
Load Cells/Transducers
Magnetic Sensors
Pressure Sensors
Torquemeter/Torque Sensor
Ultrasonic Sensors
Vibration/Shock Monitors
Migatron SPC-701 Adjustable Set Point Controller
Migatron SPC-701 set point controller is an adjustable control with 1 setpoint. The setpoint is independently adjusted, and has a Form C relay output. This control can be used with any sensor or device that produces a 0-20 mA, 4-20 mA, 0-10V or 2-10V analog output.

Migatron SPC-701 set point controller will work with all Migatron analog output sensors. Besides the 1 relay output, there is a 0-10V analog output. This output can be used to drive a meter or other analog drive controls. This analog output can feed a SPC-701 or SPC-704 to provide additional setpoints.

Migatron SPC-701 set point controller also provides 24 VDC excitation power at to drive input sensors. The SPC-701 has a signal averaging potentiometer that helps alleviate false trips during sudden signal changes.

Migatron SPC-701 set point controller can be mounted on Snap Track, DIN rail (with optional DIN mounting plate. Part #7942742 ) or four studs. The terminal blocks are press to open for easy wiring. There is an easy to view bright LED that show the relay status.

The SPC-701 is powered by 24VDC. There is an isolated feed thru path across the board that can be used as a wiring aid. The relay output can handle up to 3 amps. Power On Status LED.
  • Analog Input
  • One Adjustable Output
  • Snap Track Mount
  • Form C Relay Output
  • Analog Output
  • Feed Through Sensor Excitation Power
  • DC Power In
  • WAGO Press Terminal Blocks

Download SPC-701 Brochure
Specifications

1. Input: 24VDC, no sensor 30 mA, with sensor up to 2A.
2. Excitation Power: 24VDC up to 2A.
3. Analog Input: 0-20 mA, 4-20 mA, 0-10 VDC, 2-10 VDC
4. Signal Input Resistance: (Voltage Input 100K Ohms) (Current Input 250 Ohms)
5. Set Point Range: (0-10 VDC) (0-20mA)
6. Set Point Hysteresis 1%
7. Signal Averaging (Voltage Input 0-1s per volt) (Current Input 0-.5s per mA
8. Analog Output: 0-10VDC with load resistance 1K to infinity
9. Relay Contacts: (Resistive Load, 2A@277AC and 3A@ 30VDC/125VAC)
10. Relay Contacts: (Inductive Load, 1A@125VAC)
11. Relay Switching Min: (Current 10MA) Max (Voltage 30VDC/277VAC)
12. Operating Temperature Range: -25 to 70 C or -13 to 158 F
13. Humidity: 0 to 100% Non-Conducting


Site Designed and Maintained by J A Callan